Click image to view full size image
BW-150 mud pump is a horizontal reciprocating single-acting triplex piston pump with eight kinds of pressure and discharge available for use. This mud water pump is commonly applied to deliver drilling fluids into drill hole in the drilling engineering of geology, and it is fit for diamond drilling with small aperture and a maximum depth of 1500m. It is also perfect for middle and low pressure cement slurry perfusing.
The drilling fluid used by this reciprocating piston pump shall not contain any chemical impurities that are corrosive to metals and rubber parts, and the temperature of the fluid shall not exceed 50ºC . When using mud for flushing, the recommended proportion of water and mud is between 1.03 and 1.12, viscosity of mud between 18 and 25S, silt content lower than 4%, diameter of sand particles not exceed 3mm, and PH value around 7 to 8. No tiny mud balls, weeds, leaves and other impurities are allowed in the mud.
With long service life of high wear parts, small volume, light weight, easy assembly and disassembly, this mud water pump enjoys stable performance.
The drilling fluid used by this reciprocating piston pump shall not contain any chemical impurities that are corrosive to metals and rubber parts, and the temperature of the fluid shall not exceed 50ºC . When using mud for flushing, the recommended proportion of water and mud is between 1.03 and 1.12, viscosity of mud between 18 and 25S, silt content lower than 4%, diameter of sand particles not exceed 3mm, and PH value around 7 to 8. No tiny mud balls, weeds, leaves and other impurities are allowed in the mud.
With long service life of high wear parts, small volume, light weight, easy assembly and disassembly, this mud water pump enjoys stable performance.
| BW-150 MUD PUMP | |
| Type | Horizontal, triplex, reciprocating, single acting piston pump |
| Stroke | 70mm |
| Bore | 70mm |
| Pump speed (s.p.m) | 222,130,86,57,183,107,71,47 |
| Output volume (l.p.m) | 150,90,58,38,125,72,47,32 |
| Discharge pressure (Mpa) | 1.8,3.2,4.8,7.0,2.3,4.0,6.0,7.0 |
| Volumetric efficiency | 85% |
| Input power (Kw) | 7.5 |
| Suction pipe dia (mm) | 51 |
| Discharge pipe dia (mm) | 32 |
| Drilling hole depth (m) | Diamond core drilling < 1500 |
| Overall dimensions (mm) | 1840*795*995(with motor) |
| Weight (kg) | 516(with motor) |